Which parts make up an electric car heater?

① Filter heating part: wrap the ring heater on the filter and tighten it with two pipe clamp clamps to make the heater close to the filter. Place the plugged part of the heater facing down.

② Pipe heating part: replace the original oil pipe section of the filter with the oil pipe with heating function, and insert the end with the power socket into the filter.

③Intelligent control part: connect from the battery adjacent to the main controller, the red wire is connected to the positive pole, and the black wire is connected to the negative ground. Install the controller on the spare port of the external table. The other road runs from the controller to the coarse filter, and is connected to the power socket of the filter and the heating socket of the oil pipeline.

This is the main content of this issue. If you want to learn more about electric vehicle heaters, please contact us in time.