Installation position and fault code of air heating parking heater

Please note that!

■ the nozzle of combustion supporting air must be kept unblocked and the air must be clean to avoid dust, rain and snow, so as to avoid carbon deposition.

■ the nozzle of combustion air pipe shall not face the displacement direction.

Regularly check whether the intake pipe stops.

Installation of exhaust device

The universal installation assembly contains a metal exhaust pipe, one end of which is fixed on the exhaust port of the heater with a clamp, and the other end of which is fixed on the car body with an R-type clamp to prevent vibration.

Please note that!

The exhaust pipe should be tilted downward, and the discharge of brake condensate should not be blocked by rain, snow and dirt.

■ the exhaust pipe must not be in the forward direction of the vehicle.

■ the exhaust pipe must not go beyond the boundary of the side of the vehicle.

The outlet of exhaust pipe is fixed under the cab to prevent the exhaust from entering the cab through the gap and causing personal injury.

The exhaust pipe shall be completely cut into sections.

When shrinking the exhaust pipe, pay attention to the distance between the exhaust pipe and the intake pipe, so as to avoid the exhaust gas from the intake device being inhaled as combustion air.

be careful!

During the operation of the inverter, it is not allowed to work in the area where the exhaust guide device is located, so as to avoid the burn and scald caused by high temperature exhaust gas. The heater should be turned off first, and it should be carried out after the body is cooled.

The bottom of the car should be sealed to prevent the exhaust gas from the heater from entering the car. It is forbidden to sleep in the car during the operation of the inverter. Our company will not be responsible for any consequences.

The gas discharged from the exhaust guide device belongs to high-temperature toxic waste gas, which should not be inhaled by human body.

4. Installation of heating air duct and precautions

Installation of heating air duct and precautions

1 air inlet top 2 air outlet hood 3 air outlet pipe clamp 4 air outlet pipe

Please note that!

When fixing and fixing the heating air duct, it is not allowed to blow directly to people, animals and temperature sensitive materials because of its large amount of heat radiation, so as to avoid unnecessary injury.

■ high temperature on the hot air duct throughout the operation from the heater.

■ if the heating air duct is not installed, a protective sleeve must be installed on the air outlet side

When installing the heating air inlet, it should be noted that under normal operation conditions, exhaust gas from the engine and heater of the vehicle should not be inhaled, and dust, smoke, etc. should not be penetrated into the heating air.

When circulating air is used for heating, attention should be paid to that the replaced hot air cannot be directly absorbed when installing the circulating air intake.

In case of overload failure, the local air temperature can be as high as 170 seconds and the surface temperature can be as high as 90 ℃ in case of emergency shutdown due to failure. Therefore, only the original high-temperature air duct installed in our company can be used to guide the hot air.

be careful!

The components such as heater and heating air duct must be installed according to the instructions. During the operation of the machine, flammable materials such as quilts should be placed on the machine body and air duct. The air outlet should not be blocked by any objects to prevent fire. Otherwise, our company will not be responsible for any consequences.