The heater can be applied for heating the cab of the freight vehicles, vans-, storage battery cars and all kinds of other vehicles.
Can preheat the coolant of the engine to avoid wear and tear of engine that started at low temperature;
Can eliminate the window frost;
Environmentally product, low emissions, low fuel consumption; heater exhaust emissions to meet euro IV engine emissions requirements.
Compact structure, easy to install;
Can dismantle to a new car when replace vehicle.
Volatile technology, by the ceramic ignition plug will fuel heating evaporated into gas, fast ignition, full combustion.
The use of advanced automatic control technology, with a reliable abnormal operating conditions.
Water, electricity, temperature can be set arbitrarily .
Can use water.
Product Description
Scope of applicationThe 5kW (gasoline version / diesel version) of this product is applicable to all kinds of vehicles with diesel / gasoline as fuel.
Installation reason of water heating parking heater1. In the cold winter, you can warm up the engine and cab before you get on the bus, drive away the cold, improve the driving environment, and no longer need to warm the garage. 2. The water heating parking heater uses automobile coolant to exchange heat, preheat the engine and cab, solve the problem of engine starting at low temperature, greatly reduce the air-cooled wear caused by low-temperature start, and prolong the engine life by more than 30%. Compared with the warm-up of cold start engine, the water-heated parking heater can save more fuel
Safety instructions for installation1. Installation of water heating parking heater, Objects around the heater must be protected from high temperature or damage. 2. Exhaust emission system: When installing the exhaust outlet, the exhaust gas must be prevented from entering the heated space through the ventilation device. The exhaust port must avoid flammable and explosive materials, and avoid heating or igniting combustible materials on the ground. 3. Inlet of combustion supporting air: It is not allowed to inhale combustion supporting air for heater combustion from the heating chamber. When installing the air inlet, it should not be blocked by other objects.
Operation safety notice:1. It is not allowed to take the following measures during the use of the product: 2. Change key parts of heater at will: 3. Violation of the specifications or requirements in this manual during installation and operation: 4. Only original accessories and original accessories are allowed for installation or maintenance 5. It is not allowed to use the heater in the environment where flammable steam or dust is easily formed, As follows: Fuel warehouse: carbon storage warehouse: Wood warehouse: granary and other places with clear requirements for fire safety: 6. The heater must be turned off when refueling 7. During the operation of the heater, it is not allowed to stop the heater by forced power-off.
Packing list1X WATER PARKING HEATER
1X TELESWITCH OR AUTO SWITCH ANDREMOTE CONTROL
1X WATER PUMP
1X WIRING HARNESS
1X TUBE
1X OIL PUMP
1X PUMP HOLDER
1X FUEL FILTER
1X OIL TUBE
1X BIG ELBOW
1X SMALL ELBOW
1X AIR INLET HOSE
1X EXHAUST PIPE
1X EXHAUST SILENCER
1X HOSE HOLDER
1X CROSS
1X AIR FILTER
6X SHORT PIPE
1X OIL EXTRACTOR
12X HOSE CLAMPS
12X SMALL HOSE CLAMP
5X SCREWIV
4X SCREW
1X IRON STENT
Packing & Delivery
Our Company
NINGBO WIN FULL AUTO PARTS CO.,LTD.WE ARE A PROFESSIONAL MANUFACTURER OF AUTOMOTIVE PARTS. A PROFESSIONAL MANUFACTURER INTEGRATING DESIGN, DEVELOPMENT AND MANUFACTURING. WE SPECIALIZE IN A RANGE OF FASHION ACCESSORIES.DIVERSIFIED, REASONABLE PRICES AND ON TIME DELIVERY.
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
Contact: Judy Lin
Phone: +8615888128513
E-mail: [email protected]
Add: 228 Meidis Road, Wuxiang, Ningbo, Zhejiang, China